Inspiration for Your Systainer Fitouts

Sponsored by Systainer USA

MicroJig FitFinder Ultra Kit in a Systainer³ S 147

Fitout By MicroJig

MicroJig, System Partners, Limited Edition, Systainer³ S 147, Light Grey Systainer, Router Accessories, Router Bits, Lid Card, Custom Foam

A light gray Systainer³ S 147 with a green lid handle and a green catch printed with the MicroJig logo in yellow, a FitFinder Ultra Kit label in one card slot and a contents diagram in the other

Setting up a router table means getting the bit height and the fence position right, usually by test cut. MicroJig’s FitFinder Ultra Kit puts the tools for that in one case: the FitFinder 1/2 Gauge, which sets a bit to exactly half the stock thickness, its upgrade kit, the Fence Boss magnetic stands and steel rule for setting the fence, and two Wave reversible glue joint bits, one on a 1/2” shank and one on a 1/4”.

It is a 25th anniversary edition, and MicroJig says it is limited to 1,500 units.

Looking down into the open systainer at the black foam insert, with the FitFinder 1/2 Gauge, both Fence Boss stands and the glue joint bits each in a fitted pocket

A systainer made for the kit

The case is a Systainer³ S 147, and Systainer USA worked with MicroJig to make it theirs.

The catch is printed. MicroJig’s logo sits on the one part every user touches, in their yellow on green.

Close-up of the green Systainer³ catch with the MicroJig logo printed on it in yellow

The card slots carry labels. One names the kit and holds the barcode, the other shows the contents. On a shelf or in a stack, the front of the systainer says what is inside.

Inside the lid, a printed card is a map of the kit. It shows where each part goes, down to the upgrade parts stored under the FitFinder and the holes for extra bits.

The inside of the open lid, with a printed FitFinder Ultra Kit card that labels the position of the FitFinder 1/2 Gauge, the Fence Boss stands and ruler, the glue joint bits and the holes for storing additional bits

The foam is cut to the parts. Each piece has its own pocket, so the kit goes back the way it came out and a missing part is obvious.

The result stacks and locks onto every other systainer in the shop, which a cardboard box or a one-off blow-molded case never will.

For brands thinking about their own

MicroJig is a System Partner: a brand whose product ships inside a systainer. This kit follows their GRR-RIPPER AIR ULTRA ‘25. If you make a tool or a kit and want it to arrive in a case your customer keeps, the Systainer USA partners page lays out how it works.

One system. For everything. For everyone.
Systainer USA.

This fitout by:

MicroJig

MicroJig

Smarter Woodworking Tools. Work Safer. Work Smarter.® MicroJig is re-imagining an ancient craft and changing the way you work with wood.

This post may contain affiliate links to products from Systainer USA and other vendors. We may earn a commission on qualifying purchases.

Did this fitout inspire you?

Help build the systainer community and submit your works!

Systainer USA's weekly pick from Systainer Works, straight to your inbox.