Fitout By Jack's Cool Designs
Domino, Kaizen Foam, Systainer³ M 187, Light Grey Systainer, Systainer³ XXS 33, 3D Print
My Domino came in an original generation 1 Systainer, and I wanted to swap it over to a generation 3 Systainer. A Systainer³ M 187 was picked. I used 57mm Kaizen foam from Fastcap, and the Systainer Gen 3 Lid Foam from Systainer USA.
The Domino Systainer foam is cut to receive the DF500 machine, the cross stops, the trim stop, a TSO BigFoot, as well as a Systainer³ XXS with a 3D printed insert I designed to store the Domino cutters and wrench.
I used the Festool branded XXS, the Tanos version from Systainer USA also works.
The STL for the insert is available for free at: https://www.printables.com/model/509954-festool-domino-micro-systainer-bit-case
I also sell the insert on Etsy if you don’t have a 3D printer: https://www.etsy.com/
I also swapped my Dominos from their generation 1 Systainer into a generation 3 organizer, and used odd sized 3D printed insert boxes to maximize storage. The STLs for those are available at: https://www.printables.com/model/553905-systainer3-organizer-bins
Explore this and the entire Systainer lineup at Systainer USA.
Jack's Cool Designs
This post may contain affiliate links to products from Systainer USA and other vendors. We may earn a commission on qualifying purchases.
