Inspiration for Your Systainer Fitouts

Sponsored by Systainer USA

Fitting the Kreg Edge Foam Into a Systainer³ M 237

Kreg, Systainer³ M 237, Sapphire Blue Systainer, Woodworking

A sapphire blue Systainer³ M 237 with a yellow catch, open on a speckled garage floor, with the Kreg Edge loose tenon joiner in Kreg's black foam insert beside a bag of tenons and two small accessories

The Kreg Edge loose tenon joiner comes with a fitted foam insert but no case. Kreg’s FAQ points buyers to the Systainer³ M 237, and that is how this user found his: a sapphire blue Systainer³ M 237 with a daffodil yellow catch.

The foam does not drop straight in, though. It has to clear a feature in the floor of the systainer. This user measured what he cut:

The form-fitted organizer required a minor modification to fit in the systainer. After two 1/2” × 7/8” × 9-1/2” strips were removed from the two poly-foam bottom edge short sides, the Kreg Edge organizer fit perfectly in the systainer.

That is one strip off the bottom edge of each short side. Kreg’s FAQ mentions the notch too.

He is not new to the system. His first systainer came with a tool.

I purchased a Festool product 7+ years ago. It came with a systainer. I like the tool protection, storage, and organization qualities of the systainer.

The Edge is cordless, and the Kreg foam has no pocket for a battery or charger. For one way to add them, see a Kreg Edge in a sky blue Systainer³ M 237, where a second layer of Kaizen foam goes on top.

One system. For everything. For everyone.
Systainer USA.

This post may contain affiliate links to products from Systainer USA and other vendors. We may earn a commission on qualifying purchases.

Did this fitout inspire you?

Help build the systainer community and submit your works!

Systainer USA's weekly pick from Systainer Works, straight to your inbox.