Friday Fitout Favorites — Systainer USA's weekly pick, straight to your inbox. Sign up →

Inspiration for Your Systainer Fitouts

Sponsored by Systainer USA

Inside Each Drawer of a Sortainer

Festool, T-Loc Sortainer, systainer T-Loc Generation, MFT, Clamps, TSO, 3D Print, Parts Organization

Looking down into the open middle drawer of a Festool T-Loc Sortainer, divided into three sections: Festool lever clamps on the left, black clamps in the narrow center, and screw clamps with green printed riser blocks on the right, under a drawer front labeled Rapid Clamps, MFT Risers, MFT Clamping Elements, UJK Dog Rail Clips, TSO Bench Dogs and Rail Stops

An MFT top is only as useful as what goes in its 20 mm holes, and that means a lot of small, similar-looking parts. This user keeps all of them in one Festool T-Loc Sortainer, three drawers tall, with labels on every drawer front.

I’m trying to put together a rig for all the FORG3D stuff plus the Grabo, and then the Sortainer I currently have has all my Festool and related 20 mm clamp options. Still moving into the third one at the bottom.

The top Sortainer drawer open: four red MFT clamping elements seated in gray and black printed holders in the center section, with small bins on either side holding bench dogs, rail dogs, green caps, star knobs, washers and hex keys

The top drawer holds the MFT clamping elements in printed holders, flanked by bins of bench dogs, rail dogs, knobs and hex keys. The lever clamps, screw clamps and risers sit in the drawer below.

The bottom Sortainer drawer open and only partly filled: green Festool parts still in their bags on the left, a divided center section with a few bolts and printed pieces, and round blue bench pucks and bagged gray plates on the right

The bottom drawer is the one still being moved into. Next up is the rig for the FORG3D gear and the Grabo.

One system. For everything. For everyone.
Systainer USA.

Related Fitouts

Rolling a Tool Kit into Guitar Class at Marc Adams

Rolling a Tool Kit into Guitar Class at Marc Adams
Two Stacks, Ready to Roll for Installs

Two Stacks, Ready to Roll for Installs
Router Bits on Rails Under the Router Table

Router Bits on Rails Under the Router Table
3D-Printed Holders for the Hose and the Nozzles

3D-Printed Holders for the Hose and the Nozzles
A Painter's Spray Guns in a Sortainer³

A Painter's Spray Guns in a Sortainer³
The Air Fryer That Fits the Systainer Format

The Air Fryer That Fits the Systainer Format

This post may contain affiliate links to products from Systainer USA and other vendors. We may earn a commission on qualifying purchases.

Did this fitout inspire you?

Help build the systainer community and submit your works!

Systainer USA's weekly pick from Systainer Works, straight to your inbox.